Plastic emulsion pumps are an outstanding method of dispensing thick liquids. These personal care solutions are found in the beauty industry. They come in various shapes and sizes. If they are used and designed in the same way, the lotion pump will dispense the required amount of lotion.

　　Structure and function of lotion pump

　　Before buying a lotion pump from a lotion pump manufacturer, it is best to understand how it works. Although there are many designs in the industry today, one basic principle applies to all designs. This blog post explains the lotion pump and its components. It also addresses how they generally contribute to the function of the pump.

　　Closure

　　The closing of the lotion pump is the function of screwing the components on the bottleneck fish. Usually, it is identified by the neck destination. These destinations include approximately 28 to 400. Mainly made of plastic called PP, the closure design has an impressive rib side. It also has a relatively smooth surface.

　　The seal is equipped with a shiny shell, which provides an eye-catching appearance for the lotion pump under special circumstances.

　　Piston of lotion pump

　　The piston of the lotion pump has various designs. Some have housing components that isolate the metal from the product path. This type of pump is called a metal-free emulsion pump. It is named this way because the product stored in it cannot touch the metal spring of the pump.

　　Lotion pump tube

　　The dip tube of the lotion pump is made of the famous PP plastic. This plastic extends it to the lotion pump, allowing the user to squeeze the lotion easily. Usually, the pump is paired with the bottle. Then there is a protruding bottle pump paired with the dip tube. The length of the tube is long enough to reach the contents of the bottom of the bottle. In addition, the 3-step measurement phase of the tube must also be considered when purchasing a lotion pump. A well-cut dip tube can easily maximize the use of emulsion while preventing clogging.

　　Lotion pump output

　　The output of the lotion pump is a plastic material with cc as the unit. It is also common in 0.7 to 3cc stents. There are also large pumps with larger chambers and longer pistons. The output of the piston is about 8cc. This explains why each manufacturer on the market has a different output for each lotion pump product. This provides extensive dosage control for the product and its users.

　　Final thoughts

　　As with every product in the consumer industry, it is important to understand the anatomy of the lotion pump before delving into the buying process. In this way, you can understand the existence and use of various lotion pumps. You will also learn about the pros and cons of buying one lotion pump instead of another.